Pilz PNOZ ms2p TTL coated version Bedienungsanleitung PDF herunterladen (Seite 36)

7.1 Messages

7 Operation

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

7-2

7.1.2 Signal statuses

Signal statuses7-Drehzahlwaechter_Signalzustnde

*) Status B only leads to a safe shutdown when the "broken shearpin

monitoring" option is activated (B2). If the option is not activated (B1),

only bit 9 of the diagnostic word will be set.

**) The speed output is "1" if the configured overspeed is not exceeded.

***) Input = 1: Speed monitor detects impulses

Input = 0: Speed monitor detects no impulses

****) For explanations of the speed monitor's diagnostic word, see the

PNOZmulti Configurator's online help

Encoder inputs

***)

Outputs Diagnostic word

****)

Status

Key

Incremental encoder track A

Incremental encoder track B

Proximity switch

Standstill

Overspeed, no fault on the speed monitor

Bit 9: Proximity switch fault

Bit 9: Incremental encoder fault

Bit 10: Frequency difference, track A and B

Entry in the error stack

A Standstill, no fault 0 0011 0000

Standstill, fault on proximity switch 0 0111 0100

Broken shearpin 00100 0101

C Standstill, unwanted signal change, track A 0 1011 0000

DRotating shaft, fault, track A 01100/1 **)0011

E Standstill, unwanted signal change, track B 1 0011 0000

FRotating shaft, fault, track B 10100/1 **)0011

GRotating shaft, fault at proximity switch 11000/1 **)1001

HRotating shaft, no fault 11100/1 **)0000

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 44 45

Keine Kommentare

Pilz PNOZ ms2p TTL coated version Bedienungsanleitung Seite 36