Pilz PSEN enc s2 eCAM Bedienungsanleitung PDF herunterladen (Seite 77)

Installation / Preparation for commissioning

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Deutschland

Telefon +49 711 3409-0, Telefax +49 711 3409-133, E-Mail: [email protected]

English

5.5.1 Supply voltage, X1

NOTICE

Risk of undetected damage to the internal

electronics due to incorrect overvoltages!

• If an overvoltage of >36 VDC is applied inadvertently,

the measuring system must be inspected on site.

 The measuring system must be taken out of

service immediately

 If returning the measuring system, the reasons or

circumstances under which the overvoltage

occurred should be stated

 The power supply must satisfy the requirements

in accordance with SELV/PELV (IEC 60364-4-

41:2005)

PIN Signal Description

1 + 24 VDC (11…28 VDC) Supply voltage

PIN 1/2

through-connected

2 + 24 VDC (11…28 VDC) Supply voltage

3 0 V GND

PIN 3/4

through-connected

4 0 V GND

Optical sensing unit and magnetic sensing unit have a common supply, but are

electrically isolated internally via two separate power supplies.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 92 93

Keine Kommentare

Pilz PSEN enc s2 eCAM Bedienungsanleitung Seite 77